Wanhao Duplicator 4S Dual


Wanhao D4S Dual 3D PRINTER

The Duplicator 4 3D printer is Wanhao's first dedicated 1.75 mm filament extruder.


More details

Temporarily out of stock

795,00 € tax incl.

Add to wishlist

More info

The Wanhao Duplicator 4S 3D printer has a dedicated 1.75 mm filament extruder.

This extruder was designed from scratch, and contains a number of custom manufactured parts.
We have learned a lot over our past extruder designs and have incorporated many of those lessons here: 
That's why it's smaller, lighter, and faster to build. And since it's designed from the ground up for 1.75 mm filament, it is light-years ahead of past designs in small-filament reliability.

The layer alignment is much better which results in nicer prints and higher resolution, 100 micron.

We've completely overhauled the drive system to give the optimum positioning accuracy. The entire system has been upgraded to sturdy 3/8 diameter linear shafting. 
This is probably overkill, but you can trust that the axes will be sturdy. We have also switched to self-aligning, sintered stainless steel bearings. 
These are very forgiving to DIY assembly and provide a nice, smooth motion on the steel shafts. 
We have completely replaced the Z axis with a stepper driven, cantilevered stage. 
Guided by two of the linear shafts, this completely eliminates any Z wobble and results in nicely aligned layers. 
Using a high-angle lead screw, we were able to increase the speed of the Z axis from 150mm/minute to 1000mm/minute. This means the layer changes are almost completely imperceptible.

The Wanhao 3D printers are well built, sturdy and are among the fastest currently on the market.

Connect over USB and hit print: the machine will calibrate itself and start printing.

The new electronics have been designed to make the printing experience easier than ever. 
The Duplicator 3D printer connects to your computer via a standard USB cable thanks to a USB chip on the motherboard. 
We have also added full end stop support so that you never need to touch the XYZ axes ever again. When you hit print, the machine will automatically home itself, heat up, and begin printing. 
All you have to do is sit back and relax while your Duplicator does all the work. Living in the future is awesome. Oh yeah, and the electronics are all inside, so you don't have wires dangling everywhere.

Customers printing with computer USB link sometimes fail due to the computer going into sleep mode or an automatic shut down or reboot (EG: after automatic security updates). 
For this reason, we have added an SD card reader on the printer. 
All your printer jobscan be done by this small card. A 2G card is sufficient for any 3D file and stores as many files as you like. Simple and fast is our mission.



Interface: SD or USB Link
Max Printing Object Size: 225*145*150mm
Cirtuit: 5th generation,max support 5 motor
X,Y Axis Positioning Resolution: 0.02mm
X,Y axis max speed: 5000mm/minute
Z axis positioning resolution: 0.005mm
Z axis max speed: 1000mm/minute

Product dimension: 320 x 466 x 382 mm | 12.6 x 18.4 x 15 in
Packing dimension: 560*420*520mm
Material Support: ABS and PLA
Material Size: 1.75mm wire
Material size requirement: 1.75+-0.1mm
Temperature Sensor: thermocouple temperature sensors

Position resolution: 0.1mm
Layer: 0.1mm -0.4mm
Vertical Printing Speed: 15Cubic Centi-Meter/ Hour
Object Size: 225 x 145 x 150 mm
LCD display

Material Type: ABS, PLA and many others
Filament size: 1.75mm

MK7 + Double Extruder
Max temperature: 260°
Printer Dimension: 320 x 466 x 382 mm
Printer Weight: 12KG
Electric Power Supply: 220V
Output: 200W
Software Format: STL, G code
Operation System: Windows 7, Vista, Linux, Mac, XP,



Write your review!

No customer reviews for the moment.

Write a review

Wanhao Duplicator 4S Dual

Wanhao Duplicator 4S Dual

Wanhao D4S Dual 3D PRINTER

The Duplicator 4 3D printer is Wanhao's first dedicated 1.75 mm filament extruder.